LOCAL ALERT

Clear the Leaves Off Your Hamden Sump Line Before Friday

The first real soaking after nearly three dry weeks arrives Thursday night, and a sump pump that sat idle that long, with leaves piled over its outlet, is the weak spot in most basements.

Updated November 4, 2026 · New Haven, CT

Close-up of rainwater dripping from the corner of a white gutter, with a blurred wooden roof edge behind it

A quarter to half an inch of rain Thursday night, then up to three quarters of an inch Friday and as much again Friday night. That is the National Weather Service forecast for southern Connecticut that Patch published Wednesday, and it lands after a dry stretch of nearly three weeks. To keep water out of a Hamden basement, pour a bucket into the sump pit today, make sure the pump starts and shuts off on its own, and clear the leaves off the spot where its discharge line and your downspouts empty out.

Three quiet weeks is plenty of time for a float to hang up on the side of the pit or for an outlet to disappear under a pile of oak leaves. Hard, dry ground also soaks up less of the first heavy rain, so more of it runs toward the foundation and the pit fills faster than you're used to.

Five Checks Before Thursday Night

  • Run the pump with a bucket. Pour water in slowly until the float lifts. The pump should kick on, drain the pit and stop by itself.
  • Unplug it, then clear the pit. Pull out leaves, gravel or anything else that could jam the float or the intake, and make sure the float moves freely. Plug it back in when you're done.
  • Walk the discharge line outside. Find where it ends, rake the leaves off the opening, and check that the water runs downhill and away from the house.
  • Clear the downspouts. Scoop the gutters near the downspouts and set the extensions so they drop water several feet out from the foundation.
  • Pour a bucket down the floor drain. It should disappear fast. That also refills the trap, which can dry out after a long stretch without use.

Call Before the Rain for Either of These

A pump that hums without moving water, or one that keeps running after the pit is empty, needs a licensed plumber now, while there's still dry weather to work in. The same goes for a floor drain that gurgles or drains slow, since that's the first place a backup shows up once the ground is saturated. If the pump's outlet keeps tripping, leave the wiring alone and call a licensed pro.

Our sump pump testing guide goes deeper on the pump itself, and the nor'easter basement checklist covers what to move off the floor if water does come in.

Give us a call or send the form with what your pump did on the bucket test, and we'll line up a licensed plumber who works Hamden for a sump pump repair or replacement or a floor drain cleaning.

This week's move

Before Thursday night, bucket test the sump pump and rake the leaves off its discharge outlet and your downspout extensions.

Quick Answers

How do I test a sump pump before a storm?

Pour a bucket of water slowly into the pit until the float rises. The pump should start, empty the pit and shut off by itself. If it hums without moving water or keeps running after the pit is dry, get a licensed plumber on it before the rain.

Why does my basement floor drain smell after a dry stretch?

The trap under a floor drain holds a plug of water that blocks sewer gas. Go long enough without water running into it and that plug can dry out. Pour a bucket of water down the drain to refill it. If the smell comes back, the cause is somewhere else in the line.

Sources

Need it fixed?Sump pump installation in New Haven →

Dealing with this right now?

Call and a licensed New Haven plumber from our team can be there today.

Call 203-654-9405

Licensed and insured plumbers · Phones answered 24/7

Phones answered 24/7, holidays included

or request a callback

By sending this, you agree New Haven Plumbing Pros can call or text you at this number about your request. Message and data rates may apply. Reply STOP to opt out of texts. Privacy Policy

Call 203-654-9405 · 24/7